How to keep trees healthy?

Trees are the most precious, valuable and effective part of our land. They take a lot of time to create and turn out to be the beautiful specimen that gives shadow to our homes. Trees also enhance the value of the property as well as decreases air pollution and give natural plants. Also, it gives the beauty in environment and a soothing charisma to our daily lives. It is important to maintain trees properly because these play an essential role in our lives, if we do proper maintenance it will help them grow and healthy. Following are a few essential tips to remain your trees grow strong and healthy,
Place trees in the correct area: Select the tree first and after that find the right place that obtains sufficient sun and space so that trees can be grown and give a proper shelter. Before digging must ensure that the place you have selected is far from power and utility lines. Also, do not plant deeply as most people do this mistake.

Give enough water:

same as other plants, trees also need water and you need to check it every week. You must know your tree’s moisture circumstance. Generally, grown-up trees need only one-inch water weekly whereas, fresh trees need 4-10 gallons every week but make sure to not overwater because it can damage the roots. In winter season your trees do not require extra water unless it is planted freshly but in summers deep watering is better. Give proper water by yourself and do not depend on lawn sprinklers because they might not take care of your trees the way you can do. But if you think that your tree is not growing properly then check whether it is placed correctly or consult with the arborist.

Mulch when required:

do not think that trees required to nourish annually. Fresh trees required to be fertilized occasionally till full-grown as compare to the mature trees. But if mature trees are rising badly or contain yellow plants then you need to feed mature trees as well. It is better to take the soil test to know the required nutrients for your tree.
Take care of roots: strong roots are important for the trees that mean the soil is important and must be healthy. Parking heavy vehicles under the tree can gradually take a life of the tree because soils start to flatten and it also decreases the oxygen. So, protect your trees and avoid parking weighty equipment and cars.

Trim properly:

trimming a tree can improve its formation and help them to grow healthy. Cut down the tree from where it is latent and do not contain any leaves. In summers, try to clean and organized the small, dull or broken branches because leaving dead branches on the tree can generate the bumps and humiliate the tree. So, take out damaged branches by a clean-cut this will also help trees to grow healthy and strong

Share

Essential equipment for tree surgery one must not forget!

Before you climb yourself on a tree, some essential equipment for tree surgery would be very beneficial that you should be kitted out with. You surely want to keep your trees healthy and beautiful. However, It could be a costly process to set yourself as an arborist and can be quite dangerous as well as it keeps your life at stake. With plenty of arborist equipment available in the market, there are some of the most significant ones that one must not forget when doing the extensive tree surgery procedures. If you are going to forget any of these on your job, you can have various worst possible outcomes that you definitely won’t have imagined. Be careful!

1. Arborist starter kit

Protecting yourself from injuries is possible by wearing arborist starter kit as you are working at some great heights. Accidents can happen anytime, so it’s better to wear protective things that will keep you safe from cuts and injuries. The starter kit comprises of chainsaw trousers, chainsaw boots, helmet, chainsaw gloves and jacket. These essentials will not keep you safe from hazardous situations but will also keep you in the right balance that is extremely vital in the profession.

2. Throwing bean bag

To protect yourself from unnecessary risk and save your time and effort, throwing bean bag holds prime importance. It keeps you from the repeated climbing line and is essential for hoisting an arborist rope.

3. Friction saver

To protect your climbing rope by rubbing against the tree from any wear or tear, friction saver comes to the rescue. It is a must-have for all the arborists and can be used for a variety of other tasks including the ascending of your rope.

4. Harness

It is one of the most vital parts of a daily working kit for an arborist. By getting the right harness, it will not only provide you with security at height but will also facilitate you with good support and your job performance.

5. Climbing Aids

To assist and secure yourself from various climbing tasks, climbing karabiners and zig-zag climbing aids are ideal. You can quickly move around the tree by connecting it with the rope smoothly and efficiently.

6. Spikes

If you are going to remove a tree, spikes can greatly make your work easier. For the trees that are going to fell, climbing spikes can make you do your work with much comfortability. But if you are performing some other task other than removing the tree, don’t use them as they are likely to damage it.

7. Lanyards

To adjust your position while working on the tree, climbing shorter distances, providing a secondary attachment point for safety and to allow your movement towards and away from the trunk, lanyards are one of the most necessary equipment.

8. Rope

The center of every function you are going to perform will be assisted with the ropes that itself defines its importance. When buying a rope, look out for a fine quality rope that is in good condition to avoid any risky situations.

Share

Tree Removal Safety Tips

Trees are generally great for improving the appeal of your garden, but when they grow too large, they can be life-threatening. When a tree gets to it maturity age, it begins rotting from inside, as well as a number of its branches start falling. For those who have a huge and older tree near your home, you should consider getting rid of it before it is too late. Getting rid of a big tree can be extremely dangerous which is also a nasty idea considering to remove it on your own. The best method to go about removing a dangerous tree from your garden is by hiring a skilled expert to do the job for you. However, it is wise to familiarize yourself with the safety measures of removing a tree so that you can have the ability to determine whether the contractors you hire are working in the proper way.

Power Lines Safety Tips

If your tree is near to power lines, you ought to be cautious when removing the tree because the powered line may pose a great danger to life. It is possible to consider contacting the power company so as to pre-arrange exactly how the powered lines may be de-energized during the tree removing. In accordance with several states law, it really is a requirement that any tree which is about ten feet close to a power line be eradicated by trained professional who has line- clearance. While cutting down a tree, you ought to ensure that it fall the opposite side of the power line if no assets can get affected. If there is a home on the opposite side, you can call the power company to come and take off the line whenever you cut the tree, so they may return the power line as soon as the task is over.

Tree Removal Safety Tips

Successful Planning

For every task to be successful planning in advance is generally an important step. Even though there are no electrical power line close to the trees, you have to plan properly so that your task can work smoothly. The tree removal professional should check the trees before the task to recognize any possible hazards such as presence of holes in the working area, weak or destroyed branches if the contractor has to climb the tree. The tree ought to be taken away during a quiet daytime as rainwater, snowfall and powerful wind can make the task to be dangerous. But, you can take advantage of the wind to send the tree towards a secure direction while falling it.

Basic Safety Gears

Basic safety gear and equipment are also vital while getting rid of a tree. The tree removal employees ought to put on motorcycle helmet, safety goggles, and weighty work gloves to avoid getting injured by cuts, chips and splinters from the trees. In case, there is a need to climb the tree when removing it the worker ought to utilize a safety string to avoid free fall if stuff go wrong. It is crucial that the equipment for example chain saws and cranes be analyzed before starting the project.

The other primary factor that many people ignore during tree removal is staying focused. The tree elimination contractors and their assistants should stay focused to make sure that everything runs nicely. If they are visitors, they need to sustain a safe distance to avoid getting hurt by falling limbs and even the trees being eliminated. Employing the correct tree removing professional is also crucial to ensure that your task is handled with a lot of competence.

Share